The control of terminal systems is no longer just a matter of power control, but is related to communication, increasing the difficulty of troubleshooting. If some lights in a certain area do not light up, please consider whether the plug is loose and whether there is a wiring problem. Before discovering such faults, please check that all plugs and quick release connectors are properly installed.
When the system is working normally, the air conditioning panel sends out communication signals, which are transmitted to each light component through the data bus. Each light component also has pre loaded data to identify the communication signals emitted by the air conditioning panel and convert the data into light intensity and color changes. The device is designed with three chambers, and the electrical box is designed with penetrating convection heat dissipation. The electrical appliances and light sources are installed in separate chambers, greatly reducing the operating temperature of the electrical appliances. The reflective cover adopts one-time rolling edge processing technology in the transparent part, with good sealing performance. Water mist will not enter the interior of the lamp, and the light projection is uniform and soft.
Suitable for fixed lighting in various high-rise and super high-rise locations. The interior of the lamp body adopts seismic resistant materials and shock-absorbing structures, which can work in various high frequency and strong vibration places for a long time. The electrical appliances are side open and can be maintained without removing the lights.
Control line faults can be divided into two categories: one is faults on multiple lines (including lights not turning on, incorrect or unresponsive lights, lights automatically turning on); The other is a circuit malfunction. When a fault is detected, first test it on the automatic call control panel, or select "Automatic Call Control to Remote Control Unit" to download the automatic call control data to each LED component to see which LED components have responded to the fault. The automatic call control panel will also display fault information.