The function of car brake lightsBrake lights are generally installed at the rear of vehicles, with a red main color to enhance the penetration of the light source, so that vehicles driving behind can easily detect the front vehicle's brakes even in low visibility, thus preventing rear end accidents. A simple car model is powered by a fuse, then to the brake switch. When the brake pedal is pressed to brake, the switch is connected, and electricity is sent to two brake lights and a high mounted brake light. It is connected to the car body through a negative wire to form a circuit.
As the name suggests, brake lights are the lights that come on when a vehicle brakes. Generally in red, it serves as a warning to vehicles behind; In addition, brake lights can effectively prevent rear end collisions and reduce traffic accidents.
The brake lights have strong brightness and are also quite noticeable. They are mainly used to remind vehicles behind to slow down or stop. If the brake lights are used incorrectly or have problems, it is easy to cause rear end collisions. In addition, when replacing brake light bulbs, it is important to note that tail lights on vehicles produced in China are generally designed for dual use, with two filaments inside the bulb. The weaker one is the small light, and the stronger one is the brake light. Some manufacturers design it as a high and low foot insertion type, which is very convenient to use. Be careful not to reverse the connection when replacing.