Unplug the lamp holder with the power cord and hold the lamp by hand to avoid damage. Release the snap ring of the lamp holder and remove the lamp, then reinstall a new bulb. The reassembly process is the opposite of the disassembly sequence and will not be repeated here. When reinstalling the dust cover, be sure to tighten it to prevent rainwater and dust from entering the headlights.
The front lights are relatively more complex. There are a total of three lights in the front and inside. First, use a knife or screwdriver to pry open along the U-shaped front part. Dismantling is complete. Remove the lampshade to remove the bulb. When installing the LED tailbox light bulb, be sure to insert it flat and ensure it is tightly inserted, just connect it to the interface.
How to replace car headlights - Replacing tail lights: Open the luggage compartment lid, cut off the vehicle's power, clean the luggage compartment, and leave space for replacement. Remove the dust shield on the back of the car light.
Step 1: Disconnect the power socket of the light bulb. Step 2: After unplugging the power interface, remove the waterproof cover behind the light bulb. Step 3: Remove the light bulb from the reflector cover. Bulbs are usually fixed by steel wire retaining rings, and some models also have plastic bases for bulbs.
Replacement of taillights: Open the luggage compartment lid, cut off the vehicle's power supply, clean the luggage compartment, and leave space for replacement. Remove the dust shield on the back of the car light. Most car lights come in two forms: bulb socket integrated and bulb socket separate. The former is introduced here, while the latter can be found in the replacement of front headlights below.